- Test methods
Find relevant film and packaging tests of industry and trade in the following categories or the full-text search
- Expertise
Our areas of expertise are in line with the areas of interest of our clients.
- Order
Create test orders, print shipping documents, maintain data, load Seminar folders, find contacts, give feedback, and more
- Company
Evaluation of conformity
specific migration
Overall migration Sensory analysis
Expert opinion
Mechanicall properties
Material analysis
optical tests
permeation
Information about tests
FINAT peel adhesion
Testing the adhesive strength of adhesive labels, self-adhesive labels, adhesive tapes, silicone coatings against standard glass plate or original surfaces/adhesives
| test method: | Mechanicall properties |
| Norms: |
FINAT FTM 3 (2001-05) FINAT FTM 1 (2014-02) FINAT FTM 10 (2009-02) FINAT FTM 2 (2014-02) FINAT FTM 9 (2001-05) FINAT FTM 11 (2001-05) |
| Needed sample size: | at least 20 labels and possibly a linear meter of the original substrate; In the case of test specimens provided, min. 5 pieces of each sample |
Standardprüfungen
Finat FTM 01: Peel adhesion (180°)Peel adhesion (180°) at 300mm per minute
Norm: 180
Finat FTM 02: Peel adhesion (90°)
FTM 2 Peel adhesion (90°) at 300mm per minute
Norm: 90
Finat FTM 09: loop- tack
Testing of loop- tack properties
Norm: loop
Finat FTM 10: quality of silicone coatings
Peel adhesion test for evaluation of the quality of silicone coatings for adhesive laminatese by determination of peel adhesion of a self- adhesive tape
Norm: Silikonbeschichtung
Finat FTM 11: silicone coatings- subsequent adhesion
Test to evaluate the influence of a release surface on the adhesive properties. The adhesive strength of a standard adhesive tape against float glass without and after contact with the release surface is compared.
Norm: 180
back to overview Mechanicall properties
Search examinations
Your contact person
Matthias Böhne
+49 441 94986-11
matthias.boehne@innoform.de
Examinations in this area
- Abrasion test of printings acc. Dr. Ruf method
- Air permeance (Gurley)
- Anti-dew (anti-fog) test
- Bending stiffness
- Blocking test/blocking strength
- Bond strength/peel force of laminates/multi-layer films/bondings (temperature range - 40 up to + 120 °C)
- burst resistance (Mullen) paper
- Characterisation of stretch hood and stretch wrapping films by hysteresis tensile test (only in stretching direction, e. g. generally in TD)
- Cling adhesion of stretch wrap films, agricultural stretch films, catering films, cling films and other cling films
- coefficient of friction COF
- Compression test on cups, buckets and basins (temperature range - 40 up to + 120 °C)
- Creep test
- Curling or flatness
- Curvature of films
- Determination of thickness of plastic films, aluminium foils, plane multilayer-materials and sheets
- Determination of weight
- Dimensions and repeating patterns on pouches, bags etc.
- Drop test of bags and pouches
- Evaluation of flatness, curvature and wrinkling of plastic films - strip method
- Fat permeability/fat density
- Fat-repellent impregnation of paper, lipophobic properties, Kit test
- FINAT peel adhesion
- Gelboflextest/Brugger KFT
- Grammage, yield
- Impact resistance by free-falling dart method (Dart Drop), staircase method
- Impact resistance by the free-falling dart method – Instrumented puncture test
- Indentation hardness (Shore hardness)
- Light fastness/ Wool (blue) scale - artificial irradiation by filtered xenon arc light
- Linear dimensional changes/dimensional stability/temperature stability of films and sheets
- Printing ink adhesion (Tesa test)
- Printing inks and coatings/ lacquers- Fastness;Suitability tests, resistance, hot alkali resistance
- Puncture resistance, quasi-statical (temperature range - 40 up to + 120 °C)
- Roughness acc. Bendtsen
- Seal resistance of printings or coatings (heat resitance)
- Seal seam quality of PE- pouches or sacks (temperature range -40 to +120 °C)
- Seal strength, tensile test on strips (temperature range -40 to +120 °C)
- Sealing and welding properties of films, verification and comparison by laboratory sealing press
- Sealing seam strength of peelable bags, sacks, sealed packages with package testing device for determining the opening forces
- Sealing/welding properties of films/hot-tack test of films
- Shear strength of glued seams (temperature range - 40 to +120° C)
- Shrinkage of PE films (Betex tester)
- Smoothness according to Bekk
- Sterilisation/pasteurization in laboratory autoclave
- Storage test in temperature-controlled room under standard atmospheres23°C/ 50 % r.h.
- storage test/ accelerated aging in explosion protected heating chamber (controlled temperature)
- Storage test/accelerated ageing in climate chamber (controlled temperature and relative humidity)
- Storage test/accelerated ageing in lab drying oven or refrigerator (controlled temperature)
- Surface resistance/resistivity
- Tear resistance (also folded edges), (temperature range - 40 up to + 120 °C)
- Tear resistance (Elmendorf)
- Tensile test aluminium films
- tensile test films and laminates (temperature range -40 to +120 °C)
- Tensile test paper wet strength
- Tensile test paper, sealing strength of paper samples
- Tensile-impact strength
- Unpacking barness of cups (hollow bodies)
- Volume determination of carrier bags and pouches
- Water absorption of paper/Cobb test
- Weathering test - wet smear resistance of printed peat culture, substrate and humus packaging
- Wetting tension (e. g. for determination of Corona treatment intensity)
© 2024 Innoform Coaching GbR