- Test methods
Find relevant film and packaging tests of industry and trade in the following categories or the full-text search
- Expertise
Our areas of expertise are in line with the areas of interest of our clients.
- Order
Create test orders, print shipping documents, maintain data, load Seminar folders, find contacts, give feedback, and more
- Company
Evaluation of conformity
specific migration
Overall migration Sensory analysis
Expert opinion
Mechanicall properties
Material analysis
optical tests
permeation
Information about tests
Gelboflextest/Brugger KFT
Wrinkle test in which a piece of film of approx. DIN A 4 size is cylindrically wrung up at an angle of max. 440 ° in the Brugger KFT tester.
Usually 100 cycles are performed, afterwards the sample is tested e. g. on hole formation, delamination, oxygen or water vapour transmission rate, optical density or the like. The base price includes the examination of max. 4 sheets over 100 cycles at an angle of max. 440 °. Other test conditions are available upon request, calculation according to time spent. Minimum sample size 280 mm x 200 mm.
| test method: | Mechanicall properties |
| Norms: |
ASTM F 392/ F 392M (reapproved 2021) |
| Needed sample size: | 4 x DIN A 4 for standard tests, or according to the requested number of specimens 1 x DIN A 4 per specimen |
Standardprüfungen
Condition A- full flex for 1 hFull Flex= 440° for 1 h= 2700 cycles
Condition B- full flex for 20 min
Full Flex= 440° for 20 min that is 20 min =900 cycles
Condition C- full flex for 6 min
Full Flex= 440° for 6 min= 270 cycles
Condition D- full flex for 20 cycles
Full Flex= 440° for 20 cycles
Condition E- partial flex for 20 cycles
Partial Flex= 400° for 20 cycles
back to overview Mechanicall properties
Search examinations
Your contact person
Matthias Böhne
+49 441 94986-11
matthias.boehne@innoform.de
Examinations in this area
- Abrasion test of printings acc. Dr. Ruf method
- Air permeance (Gurley)
- Anti-dew (anti-fog) test
- Bending stiffness
- Blocking test/blocking strength
- Bond strength/peel force of laminates/multi-layer films/bondings (temperature range - 40 up to + 120 °C)
- burst resistance (Mullen) paper
- Characterisation of stretch hood and stretch wrapping films by hysteresis tensile test (only in stretching direction, e. g. generally in TD)
- Cling adhesion of stretch wrap films, agricultural stretch films, catering films, cling films and other cling films
- coefficient of friction COF
- Compression test on cups, buckets and basins (temperature range - 40 up to + 120 °C)
- Creep test
- Curling or flatness
- Curvature of films
- Determination of thickness of plastic films, aluminium foils, plane multilayer-materials and sheets
- Determination of weight
- Dimensions and repeating patterns on pouches, bags etc.
- Drop test of bags and pouches
- Evaluation of flatness, curvature and wrinkling of plastic films - strip method
- Fat permeability/fat density
- Fat-repellent impregnation of paper, lipophobic properties, Kit test
- FINAT peel adhesion
- Gelboflextest/Brugger KFT
- Grammage, yield
- Impact resistance by free-falling dart method (Dart Drop), staircase method
- Impact resistance by the free-falling dart method – Instrumented puncture test
- Indentation hardness (Shore hardness)
- Light fastness/ Wool (blue) scale - artificial irradiation by filtered xenon arc light
- Linear dimensional changes/dimensional stability/temperature stability of films and sheets
- Printing ink adhesion (Tesa test)
- Printing inks and coatings/ lacquers- Fastness;Suitability tests, resistance, hot alkali resistance
- Puncture resistance, quasi-statical (temperature range - 40 up to + 120 °C)
- Roughness acc. Bendtsen
- Seal resistance of printings or coatings (heat resitance)
- Seal seam quality of PE- pouches or sacks (temperature range -40 to +120 °C)
- Seal strength, tensile test on strips (temperature range -40 to +120 °C)
- Sealing and welding properties of films, verification and comparison by laboratory sealing press
- Sealing seam strength of peelable bags, sacks, sealed packages with package testing device for determining the opening forces
- Sealing/welding properties of films/hot-tack test of films
- Shear strength of glued seams (temperature range - 40 to +120° C)
- Shrinkage of PE films (Betex tester)
- Smoothness according to Bekk
- Sterilisation/pasteurization in laboratory autoclave
- Storage test in temperature-controlled room under standard atmospheres23°C/ 50 % r.h.
- storage test/ accelerated aging in explosion protected heating chamber (controlled temperature)
- Storage test/accelerated ageing in climate chamber (controlled temperature and relative humidity)
- Storage test/accelerated ageing in lab drying oven or refrigerator (controlled temperature)
- Surface resistance/resistivity
- Tear resistance (also folded edges), (temperature range - 40 up to + 120 °C)
- Tear resistance (Elmendorf)
- Tensile test aluminium films
- tensile test films and laminates (temperature range -40 to +120 °C)
- Tensile test paper wet strength
- Tensile test paper, sealing strength of paper samples
- Tensile-impact strength
- Unpacking barness of cups (hollow bodies)
- Volume determination of carrier bags and pouches
- Water absorption of paper/Cobb test
- Weathering test - wet smear resistance of printed peat culture, substrate and humus packaging
- Wetting tension (e. g. for determination of Corona treatment intensity)
© 2024 Innoform Coaching GbR